Labelling

2-AB glycan labelling kit (2PB reductant)

LT-KAB-VP24

£404

2-AB (2-aminobenzamide) is one of the most widely used fluorescent labels for glycosylation analysis. The LudgerTag 2-AB labelling Kit includes all the reagents required to label up to 30 glycan samples.

DMB sialic acid release & labelling kit

LT-KDMB-A1

£516

Release and labelling of sialic acids with 1,2-diamino-4,5-methylenedioxybenzene.2HCl (DMB) for fluorophore detection of chromatographically separated sialic acid variants. Kit sufficient for 22 samples.

DMB sialic acid release & labelling kit

LT-KDMB-96

£1,801

Release and labelling of sialic acids with 1,2-diamino-4,5-methylenedioxybenzene.2HCl (DMB) for fluorophore detection of chromatographically separated sialic acid variants. Kit sufficient for 96 samples (plus some dead volume for liquid handling robot use).

DMB sialic acid release & labelling kit

LT-KDMB-12

£275

Release and labelling of sialic acids with 1,2-diamino-4,5-methylenedioxybenzene.2HCl (DMB) for fluorophore detection of chromatographically separated sialic acid variants. Kit sufficient for 12 samples (6 x 2).

Glycopeptide labelling and enrichment kit

LT-VTAG-24

£848

This kit contains the reagents needed for the conjugation of V-tag dye (LT- VTAG-01) to the amine moieties of glycopeptides, and the specialised solid phase extraction (SPE) cartridges required for the purification and enrichment of the labelled glycopeptides. 

Monosaccharide release & labelling kit

LT-MONO-96

£944

For release and labelling of neutral and amino monosaccharides from glycoprotein therapeutics and pre-released glycans. This kit can be used for full quantitative or routine monosaccharide analysis. Sufficient for 96 samples. The LudgerTag Monosaccharide Analysis Kit contains reagents for the release and fluorescent labelling of monosaccharides found on glycoprotein biopharmaceuticals and standards.

2-AB glycan labelling kit

LT-KAB-A2

£391

2-AB (2-aminobenzamide) is one of the most widely used fluorescent labels for glycosylation analysis. The LudgerTag 2-AB labelling Kit includes all the reagents required to label up to 24 glycan samples.

procainamide glycan labelling kit (2PB reductant)

LT-KPROC-VP24

£491

For labelling of free glycans with procainamide (PROC) 2- picoline borane reductant. Kit sufficient for 24 samples.

2-AB glycan labelling kit (2PB reductant)

LT-KAB-VP96

£1,035

A new high throughput labelling kit for the labelling of free glycans with 2-aminobenzamide acid (2-AB). This kit contains 2-picoline borane as the reductant. Sufficient for 96 samples.

Procainamide glycan labelling kit

LT-KPROC-24

£474

For labelling of free glycans with procainamide (PROC) sodium cyanoborohydride reductant. Kit sufficient for 24 samples.

Procainamide glycan labelling kit

LT-KPROC-96

£1,277

For labelling of free glycans with procainamide (PROC) sodium cyanoborohydride reductant. Kit sufficient for 96 samples.

Permethylation kit (without methyl iodide)

LT-PERMET-VP96

£588

For the permethylation of free glycans. Kit sufficient for 96 samples. Without Methyl Iodide (MeI)

VTAG glycan release & labelling kit

LT-VTAG-C30

£1,571

To enable the release of N-glycans from glycoproteins, N-glycan labelling and clean up within 1 hour for a single sample / 2 hours for 30 samples. Each kit contains PNGase F, V-Tag fluorophore dye, reagents and SPE cartridges, sufficient for up to 30 samples.

2-AA glycan labelling kit

LT-KAA-A2

£391

For labelling of free glycans with 2-aminobenzoic acid (2-AA). Sodium cyanoborohydride reductant. Kit sufficient for 24 samples.

2-AA glycan labelling kit (2PB reductant)

LT-KAA-VP24

£404

For labelling of free glycans with 2-aminobenzoic acid (2-AA). 2- picoline borane reductant. Kit sufficient for up to  30 samples.

Showing 1 to 15 of 15 (1 Pages)